Brother MFC260C User Manual

4-2 Confidential
Error Message Cause Action
Print data is left in the
machine's memory.
Re-start printing from your computer. Data Remaining
Print data is left in the
machine's memory. The USB
cable was unplugged while
the computer was sending the
data to the machine.
Press Stop/Exit. The machine will
cancel the job and clear it from the
memory. Try to print again.
Disconnected The other person or other
person's fax machine stopped
the call.
Try to send or receive again.
Document Jam The document was not
inserted or fed properly, or the
document scanned from the
ADF was too long.
Remove the jammed document.
(Only for models with ADF.)
DR Mode in Use The machine is set to
Distinctive Ring mode. You
cannot change the Receive
Mode from Manual to another
mode.
Set Distinctive Ring to off.
High Temperature
The print head is too warm. Allow the machine to cool down.
Hub is Unusable. A Hub or USB flash memory
drive with a Hub has been
connected to the USB direct
interface.
A Hub or USB flash memory drive
with a Hub is not supported. Unplug
the device from the USB direct
interface.
Image Too Long. The proportions of your
photo are irregular so effects
could not be added.
Choose a regularly proportioned
image.
Image Too Small. The size of your photo is too
small to trim.
Choose a larger image.

Brother MFC260C Specifications

General

Brand	Brother
Model	MFC260C
Category	Fax Machine
Language	English