Brother MFC260C - Tightening Torque

6-2 Confidential
 Tightening Torque
Location of screw Screw type Q'ty Tightening torque
N•m (kgf•cm)
Grounding wire*
1
(for ADF motor) Taptite, cup S M3x6 1 0.40 ±0.1 (4 ±1)
ADF reinforcement plate*
1
Taptite, cup B M3x8 1 0.50 ±0.1 (5 ±1)
ADF unit*
1
Taptite, bind B M4x12 3 0.70 ±0.1 (7 ±1)
Taptite, cup B M3x8 1 0.50 ±0.1 (5 ±1)
ADF motor*
1
Screw, pan (s/p washer) M3x6 2 0.70 ±0.1 (7 ±1)
(Together with grounding wire*
1
using one screw)
Document roller holder*
1
Taptite, cup B M3x10 1 0.50 ±0.1 (5 ±1)
Control panel ASSY Taptite, cup B M3x10 3 0.40 ±0.1 (4 ±1)
LCD support cover*
2
Taptite, bind B M3x8 2 0.40 ±0.1 (4 ±1)
Charge stand ASSY*
3
Taptite, cup B M3x10 2 0.40 ±0.1 (4 ±1)
(Together with charge PCB)
Upper cover Taptite, bind B M4x12 6 0.70 ±0.1 (7 ±1)
Taptite, cup B M3x10 1 0.40 ±0.1 (4 ±1)
(Together with cordless PCB) Taptite, cup S M3x6*
3
1 0.40 ±0.1 (4 ±1)
Antenna & cordless PCB ASSY*
3
Taptite, Torx pan B M3x10 1 0.40 ±0.1 (4 ±1)
Taptite, cup B M3x12 1 0.60 ±0.1 (6 ±1)
Grounding wire (for WLAN PCB)*
4
Screw, pan (s/p washer) M3x8 1 0.40 ±0.1 (4 ±1)
(Together with main PCB shield frame)
Main PCB shield Taptite, cup B M3x10 2 0.40 ±0.1 (4 ±1)
Taptite, cup S M3x6*
2
1 0.40 ±0.1 (4 ±1)
Main PCB Taptite, cup S M3x6 2 0.40 ±0.1 (4 ±1)
Main PCB shield frame Screw, pan (s/p washer) M3x8 1 0.40 ±0.1 (4 ±1)
(Together with MJ/PS shield box)
MJ/PS shield box Screw, pan (s/p washer) M3x8 1 0.40 ±0.1 (4 ±1)
Taptite, cup S M3x6 1 0.40 ±0.1 (4 ±1)
Power cord holder*
5
Taptite, cup B M3x12 1 0.60 ±0.1 (6 ±1)
Power supply PCB Taptite, cup S M3x6 4 0.40 ±0.1 (4 ±1)
MJ shield Screw, pan (s/p washer) M3x8 1 0.40 ±0.1 (4 ±1)
MJ PCB Taptite, cup S M3x6 1 0.40 ±0.1 (4 ±1)
Flat cable support plate Taptite, bind B M4x12 1 0.70 ±0.1 (7 ±1)
Chassis support Taptite, cup B M3x12 1 0.60 ±0.1 (6 ±1)
Engine unit Taptite, cup B M3x12 1 0.60 ±0.1 (6 ±1)
Maintenance unit (top) Taptite, bind B M3x8 2 0.40 ±0.1 (4 ±1)
(right side) Taptite, cup S M3x6 1 0.80 ±0.1 (8 ±1)
Carriage motor Screw, bind M3x6 2 0.70 ±0.1 (7 ±1)
PF encoder PCB Screw, bind M2x12 1 0.15 ±0.05 (1.5 ±0.5)
Paper feed motor Screw, bind M2.6x4 2 0.40 ±0.1 (4 ±1)
*
1
For models with ADF
*
2
For models with color LCD
*
3
For models with cordless handset
*
4
For wireless LAN-enabled models
*
5
For 120V series