7-33 Confidential
7.6 IF YOU REPLACE THE CORDLESS PCB
[ 1 ] Register base ID code to the main PCB and base unit (cordless PCB)
Refer to Section 7.3, [ 5 ].
[ 2 ] Register cordless handsets
Refer to Section 7.3, [ 15 ].
7.7 IF YOU REPLACE THE CORDLESS
HANDSETS
[ 1 ] Deregister and register cordless handsets
The machine can support up to four cordless handsets registered. If you replace any of them,
deregister all cordless handsets and then register them.
-- Deregistering a cordless handset --
On the machine (base unit)
(1) Press the Menu key.
(2) Press the
or key to choose "Initial Setup," then press the OK key.
(3) Press the
or key to choose "Register Handset," then press the OK key.
(4) Press the
or key to choose "Terminate," then press the OK key.
The "All Delete?" appears on the LCD.
(5) Press the 1 key.
All cordless handsets will be deregistered and the machine returns to the "Register Handset"
state.
(6) Press the Stop/Exit key. The machine returns to the standby state.
To Next Page
Loading...
Need help?
General
