Brother MFC260C User Manual

9-1 Confidential
9.1 MAINTENANCE MODE FOR THE MACHINE
9.1.1 Entry into the Machine Maintenance Mode
Press the Menu and Black Start (Mono Start) keys in this order. Next press the key four times to
make the machine enter the maintenance mode.
TIP: FAX models equipped with a numerical keypad can enter the maintenance mode in the same
way as conventional models; that is, by pressing the Menu, *, 2, 8, 6 and 4 keys in this order.
The machine beeps for approx. one second and displays "
" on the LCD,
indicating that it is placed in the initial stage of the maintenance mode, a mode in which the machine
is ready to accept entry from the keys.
To select one of the maintenance-mode functions listed in Section 9.1.2, enter the corresponding 2-
digit function code with the numerical keys on the control panel. (The details of each maintenance-
mode function are described in Section 9.1.4.)
NOTES • To exit from the maintenance mode and switch to standby, press the 9 key twice
in the
initial stage of the maintenance mode.
• Pressing the Stop/Exit key after entering only one digit restores the machine to the
initial stage of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage of the
maintenance mode.

Brother MFC260C Specifications

General

Brand	Brother
Model	MFC260C
Category	Fax Machine
Language	English