Confidential
9.1.4.16
Margin Adjustment in Borderless Printing (Function code 66).................9-33
9.1.4.17 Updating of Property Data (Function code 68)........................................9-36
9.1.4.18 Head/Carriage Unit Traveling Speed Check (Function code 69).............9-37
9.1.4.19 EEPROM Customizing (Function code 74).............................................9-38
9.1.4.20 Travel of Head/Carriage Unit (for removing paper particles and dust
accumulated on the maintenance unit) (Function code 75).....................9-41
9.1.4.21 Purging Operation (Function code 76)....................................................9-42
9.1.4.22 Display of the Equipment's Log (Function code 80) ................................9-45
9.1.4.23 Equipment Error Code Indication (Function code 82)..............................9-47
9.1.4.24 Output of Transmission Log to the Telephone Line (Function code 87)...9-47
9.1.4.25 Assurance Mode Switch Setting (Function code 88) ...............................9-48
9.1.4.26 Cancellation of the Pin TX Lock Mode (Not applicable to U.S.A. models)9-55
9.2 MAINTENANCE FUNCTIONS FOR CORDLESS HANDSETS..................................9-56
9.2.1 Overview........................................................................................................9-56
9.2.2 Maintenance Functions for U.S.A. Models......................................................9-56
9.2.2.1 List of Maintenance Functions................................................................9-56
9.2.2.2 Checking of Cordless Handset ID Code and Base ID Code
(Function code 086) ...............................................................................9-57
9.2.2.3 Measuring of RSSI (Received Signal Strength Indicator)
(Function code 195) ...............................................................................9-58
9.2.2.4 Measuring of BER (Bit Error Rate) (Function code 196)..........................9-59
9.2.2.5 Version Information on Cordless Handset (Function code 197)...............9-59
9.2.2.6 EEPROM Parameter Initialization (Function code 198) ..........................9-60
9.2.3 Maintenance Functions for European Models.................................................9-61
9.2.3.1 List of Maintenance Functions................................................................9-61
9.2.3.2 Version Information on Cordless Handset...............................................9-61
9.2.3.3 Checking of Cordless Handset ID Code..................................................9-62
9.2.3.4 Checking of Base ID Code .....................................................................9-62
9.2.3.5 EEPROM Parameter Initialization ..........................................................9-63
9.2.3.6 Initializing the Cordless Handset.............................................................9-64
To Next Page