Brother MFC260C User Manual

7-14 Confidential
(6) Enter the number of the least uneven block found in step (5).
For example, if the number of the least uneven block is +4, press the 4 key when the "PF ADJ
NO. +0" is displayed on the LCD.
If the number is -4, press the
key to display the "PF ADJ NO. -0" and press the 4 key.
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.
(7) On your PC, drag and drop the "exitadj.prn" onto the BHL2-Maintenance Printer icon in the
Filedrgs window.
The machine displays the "RECEIVING DATA" on the LCD and prints out three sheets of
"EXIT adjust check" patterns (on page 7-16 for a sample printout).
(8) On the machine, press the 5 and 8 keys in this order.
The "1.PF 2.EXIT" appears on the LCD.
(9) To select the paper ejection roller adjustment, press the 2 key.
The "EXIT ADJ NO. +0" appears on the LCD.
(10) Out of the three sheets of the "EXIT adjust check" patterns (on page 7-16), check the middle
sheet and select the block that is the least uneven print. Make a note of that block number.
(11) Enter the number of the least uneven block found in step (10) in the same way as in step (6).
Then press the OK key, and the machine returns to the initial stage of the maintenance mode.

Brother MFC260C Specifications

General

Brand	Brother
Model	MFC260C
Category	Fax Machine
Language	English