Brother P-touch QL-710W User Manual

1 - 9
The selected inspection (highlighted in yellow) is performed by clicking the [Run]
button on the main screen when the machine and the PC are connected.
To change the selected inspection, click the [Down] or [Up] button. Upon completing
all required inspections, click the [To next check] button to start the next inspection.
Fig. 13 Main screen (QL-720NW Serviceman Software Tool)
The background turns yellow when selected.
Start the selected inspection.
Change the inspection item.
Clear the results of inspection, and shift the next inspection.

Brother P-touch QL-710W Specifications

General

Maximum Label Width	62 mm
Resolution	300 dpi
Cutter	Automatic
Device Category	Label Maker
Power Source	AC adapter
Printing Technology	Thermal
Connectivity	USB, Wi-Fi
Media Type	Die-cut labels, Continuous labels
Supported OS	Windows, Mac