Brother S-7300A - Page 26

S-7300A
3. FUNCTION SETTINGS
15
No. Setting range
Initial
value
Setting
units
Setting details
461
0.1
～
10.0
(seconds)
5.0
0.1
Auto running OFF time
(*) Only displayed when MSW-459 is set to "ON"
This is only enabled when the main sewing is normal sewing or pleat
presser sewing.
During auto running mode, the sewing machine motor stops for the set
time.
462
ON/OFF
OFF
－
Thread trimming by auto operation
(*) Only displayed when MSW-459 is set to "ON"
This is only enabled when the main sewing is normal sewing or pleat
presser sewing.
ON: After the time set by MSW-
460 has elapsed, the thread trimmer
solenoid turns on.
OFF: The thread trimmer solenoid does not operate.
(*7) For Japan: OFF
For other than Japan: 2