Brother TD-2020 - Buffer Analysis Tool; Role of the Buffer Analysis Tool; How to Start the Buffer Analysis Tool

1 - 37
1.3 Buffer Analysis Tool
1.3.1 Role of the Buffer Analysis Tool
Buffer analysis tool serves to analyze commands sent to the machine. Also serves to output
data files sent to the printer buffer while the machine was ON. This is common to TD-2000 and
TD-2100N.
1.3.2 How to start the Buffer Analysis Tool
Select [AN] > [ProductChkTool.exe] to start the buffer analysis tool. Tool layout is same as
serviceman tool.
Note : Be sure to store all pre-included setting files (e.g. "*.ini") in the same folder with the
execution file "ProductCheck.exe". The tool is inoperable without the file.
Note : Multiple tools cannot be started simultaneously.
Before implementing any inspection, connect the machine to the AC adapter, and to the PC
with USB cable. Turn ON the machine. If the "Found New Hardware Wizard" appears, click
[Cancel].
The inspection can be done without installing a driver.
Figure 64. Main window (buffer analysis tool)