Brother TD-2020 - 16 ]Removing the Adjuster Gear and Adjuster Rack L;R

III - 22
[ 16 ]Removing the Adjuster Gear and Adjuster Rack L/R
(1) Remove the taptite cup B M2.6X6 screw to remove the adjuster gear from the
upper cover.
(2) Remove the five PStaite M2X4 CH screws to remove the two guide holders from
the upper cover.
Figure 3.4-20
Adjuster gear
PStaite M2X4 CH
Guide holder
Upper cover
Taptite cup B M2.6X6
PStaite M2X4 CH
Guide holder