Brother TD-2020 - Write Product Information

1 - 11
1.2.8 Write Product Information
Writes product ID and product name assigned to each model into the machine.
(1) Writing product information starts automatically when the previous inspection is
completed. When operating this inspection again, check that the "Write product info" field
is highlighted in yellow, then press the [Run] button.
Writing result (TD-2130N)
Figure 14. "Write product info"
Write values for each model are shown below.
Product ID/String
Model Inspection
TD-2000 Valid
TD-2100N Valid
Model Parameter Write value
TD-2020 Product id 2055
Product string TD-2020
TD-2120N Product id 2057
Product string TD-2120N
TD-2130N Product id 2058
Product string TD-2130N