Brother TD-2020 - Write Mass Storage Information

1 - 12
1.2.9 Write Mass Storage Information
Writes product ID and product name for mass storage function assigned to each model into the
machine.
(1) Writing mass storage information starts automatically when the previous inspection is
completed. When operating this inspection again, check that the "Write mass storage
info" field is highlighted in yellow, then press the [Run] button.
Writing result (TD-2130N)
Figure 15. "Write mass storage info"
Write values for each model are shown below.
Product ID/String
Model Inspection
TD-2000 Valid
TD-2100N Valid
Model Parameter Write value
TD-2020 Product id 2059
Product string TD-2020
TD-2120N Product id 205B
Product string TD-2120N
TD-2130N Product id 205C
Product string TD-2130N