Brother TD-2020 - 17 ]Disassembling the Mecha ASSY

III - 24
[ 17 ]Disassembling the Mecha ASSY
(1) Release the hook to remove the double gear C and double gear B from the main
chassis ASSY.
(2) Remove the platen gear from the platen roller.
(3) Remove the retaining ring E2.5 to remove the double gear A from the main
chassis ASSY.
(4) Remove the two screw bind M3X4 screws to remove the tape feed motor ASSY
from the main chassis ASSY.
Figure 3.4-22
Platen gear
Double gear A
Double gear C
Hook
Double gear B
Retaining ring E2.5
Screw bind M3X4
Tape feed motor ASSY
Main chassis ASSY
Platen roller