Brother TD-2020 - 10 Write PIN Code and Local Name

1 - 13
1.2.10 Write PIN Code and Local Name
Writes unique PIN code and local name used for Bluetooth connection into the machine.
(1) Writing local name starts automatically when the previous inspection is completed. When
operating this inspection again, check that the "Write pincode and localname" field is
highlighted in yellow, then press the [Run] button.
(2) When the data is successfully written, PIN code and local number appears in the
"Results" field on the main window.
Figure 16. "Write pincode and localname"
Model Inspection
TD-2000 Invalid
TD-2100N Valid