III - 27
(8) Attach the tape feed motor ASSY to the main chassis ASSY with the two screw
bind M3X4 screws.
(9) Set the double gear A to the double gear A shaft on the main chassis ASSY, and
secure it with the retaining ring E2.5.
(10) Set the double gear B to the double gear B shaft on the main chassis ASSY.
(11) Set the platen gear to the platen roller.
(12) Set the double gear C to the double gear C shaft on the main chassis ASSY, and
secure it with the hook.
Figure 3.5-2
Double gear B shaft
Platen roller
Double gear C shaft
Platen gear
Double gear A
Double gear C
Hook
Double gear B
Retaining ring E2.5
Screw bind M3X4
Main chassis ASSY
Tape feed motor ASSY
Double gear A shaft
To Next Page
Loading...
