1 - 7
(4) The information will be shown in the "Model Info" field on left bottom of the "Input Serial
No" window. Check if the latest available version of ModelCheck.ini file is displayed. If
older version is displayed, incompatible model code will be NG on the inspection.
Figure 5. "Model Info" field
TD-2020
-
latest version 1.02
TD-2120N
-
latest version 1.01
TD-2130N
-
latest version 1.03
(5) The machine passes the inspection when the serial number entered satisfies the conditions
below. The value read is displayed in the "Model code" and "Serial number" fields, and the
corresponding destination is displayed in the "Destination" field on the main window.
<Conditions for serial number input>
• Tools and model codes for TD-2000 and TD-2100N are matched.
• The serial number entered in the "1st" and "2nd" fields are the same.
Figure 6. "Serial number" field
Model Model Code Destination
TD-2020 U63456 USA
E71967 DEU
E72048 GBR
E72589 AUS
E76066 CHN
Model Model Code Destination
TD-2120N U63457 USA
E71969 DEU
E72049 GBR
E72587 AUS
Model Model Code Destination
TD-2130N U63458 USA
E71971 DEU
E72050 GBR
E73318 CHN
TD-2130NHC U63845 USA
E74957 DEU
E74959 GBR
To Next Page
Loading...
