Using the M4 TORNADO Software
M4 TORNADO
91
Object Description Hints
Selects all objects
Deletes selected objects
Performs an autofocus before
every measurement
Defines automatically a grid with
a given number of points over
the complete image
Automatic needs a preset number of points and
type of distribution (regular grid or randomly
chosen). This allows the averaging of slightly
inhomogeneous samples.
Creates rectangular point grids The points are set on the grid directly.
Position points randomly within
field of view
The points are randomly distributed.
Number of points to be created
Name of the measurement point Enter a name for the point to be used in the
spectra. If Automatic numbering is activated all
spectra will receive this name plus a
consecutive number, beginning with the one
entered under Image number. Otherwise a
unique name has to be entered for every new
spectrum.
Number of the measurement
point
Automatic numbering on / off
Different settings for the measurement time and mode are possible for the spectrum acquisition.
The setup can be done with the dialog that opens with the downward-facing arrow next to the
button.
To Next Page
Loading...
Need help?
General
