BTG Visual-ICE - Page 96

7-14 User Manual
Message Reason for Appearance
20-03 Test All
• You selected to control all needles simultaneously
• Do you want to initiate test in all needles now?
YES NO
User selected Test button in ALL
channel to control all active channels.
To proceed, the user must conrm test
for all connected needles.
20-04 Freeze All Channels
• You selected to control all needles simultaneously
• Do you want to initiate [x%] freeze for all active
needles now?
YES NO
User selected Freeze button in ALL
channel to control all active channels. To
proceed, the user must conrm freezing
of all active needles.
20-05 Freeze All Intensity
• You selected to control all needles simultaneously.
• Do you want [x%] freeze intensity applied to all
needles now?
YES NO
User selected a freeze intensity in ALL
channel to control all active channels.
To proceed, the user must conrm the
selected intensity is to be applied to all
active needles.