Buderus Logamatic 4323 - Page 52

Heating circuit data
11
Logamatic 4323 - Subject to technical modifications.
52
Turn the rotary selector until submenu "Setback type" appears.
The display shows the selected submenu.
Hold down "Display" and turn the rotary selector until the required value appears
(here: "Standby").
The display shows the set value.
Release "Display" to save your input.
Press "Back" to return to the next level up.
HEAT CIRC. DATA 2
Hold if cold
Setback type
+
HEAT CIRC. DATA 2
Standby
Setback type
Input range Factory setting
Setback type
Hold if cold
Standby
Reduced
Hold room temp
Hold if cold