168 I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Appliances
9
Switching on: Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
Open the gas cooker lid (Fig. 179,3).
Depending on the model, either fold out or set up the flame protection
(Fig. 179,1).
Turn the control knob (Fig. 179,2) on the burner you wish to use to the igni-
tion position (large flame).
Press the control knob down and hold it.
Light the burner with a gas lighter, a match or other suitable means of
lighting.
Once the flame is burning, the control knob must be held down for 10 to
15 seconds, until the thermocouple automatically keeps the gas supply
open.
Release the control knob and turn to the desired setting.
If ignition is unsuccessful, repeat the entire procedure.
Switching off:
Turn the control knob to the 0-position. The flame fades.
Close the gas isolator tap "Cooker" and the regulator tap on the gas bottle.
Automatic ignition (with
lighting knob)
The gas cooker is equipped with electronic ignition.
Switching on:
Open the regulator tap on the gas bottle and the gas isolator tap "Cooker".
Open the gas cooker lid.
Depending on the model, fold out and lock the flame protection.
Turn the control knob (Fig. 180,1) on the burner you wish to use to the igni-
tion position (large flame).
Press the control knob down and hold it.
Fig. 179 Gas cooker
Fig. 180 Operating controls for gas
cooker
To Next Page
Loading...
