45I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
During the journey
4
Opening and closing: Grasp the handle (Fig. 27,1) of the Roman shade and slide to the left or the
right.
Securing:
Push the handle (Fig. 28,1) onto the cap. The Roman shade is secured.
4.14 Bonnet
Opening: Pull the lever (Fig. 29,1) on the left under the dashboard.
Move the bonnet in an arch forwards and upwards.
Closing:
Move the bonnet in an arch downwards and backwards until the latch locks
audibly in place.
Check whether the bonnet is locked correctly. In order to carry this out, pull
on the bonnet.
Fig. 27 Roman shade Fig. 28 Lock for Roman shade
X When the bonnet is open, there is a risk of injury in the engine compart-
ment.
X Even if the engine was switched off some time ago, it might still be hot.
Danger of burns!
X Do not work in the engine compartment while the engine is running.
X The bonnet must be kept firmly closed and locked during the journey.
After closing, check whether the lock has engaged. In order to carry this
out, pull on the bonnet.
Fig. 29 Release lever for the bonnet
(inside the vehicle)
To Next Page
Loading...
