Burstner I 2012 - Fixed Table (Table-Top for Folding, Sliding and Rotating)

85I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Living
6
Reducing size:  Open catches (Fig. 94,1).
 Slightly lift the front of the table-top and pull out.
 Remove table-top extension (Fig. 93,1) and lay it aside.
 Lift the table-top slightly and push back as far as possible.
 Set down the table.
 Secure the table-top with the catches.
Depending on the model, the suspension table may also be used as a bed
foundation.
Conversion to bed
foundation:
 Slightly raise the front of the table-top (Fig. 95,2).
 Remove table leg (Fig. 95,3) and lay it aside.
 Press the release knob (Fig. 96,1) on the lock (Fig. 95,1).
 Push the table-top approx. 45° upward and remove it.
 Bolt on the short table leg.
 Place the table-top in the holders (Fig. 95,4) on the bench seats.
6.11.2 Fixed table (table-top for folding, sliding and rotating)
The foldable table-top can be rotated and moved crossways.
Z The extension frame beneath the table-top is locked into the mounting rail.
Release the lock before lifting the table-top.
Fig. 95 Conversion to bed Fig. 96 Lock
Z Pull out the support frame before folding down the table-top. The hinges
could otherwise be damaged.