Burstner I 2012 - Conversion Door, Outside (Hartal M1); Drivers Door, Inside (Partially Special Equipment)

58 I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Living
6
Locking:  Insert the key into the locking cylinder (Fig. 41,1) and turn towards "Lock"
(Fig. 41,2) until the door is locked.
 Return the key to the central position and remove it.
6.1.2 Driver's door, inside (partially special equipment)
Opening:  Pull the door opening lever (Fig. 42,1). When this is done, the safety knob
(Fig. 42,2) is automatically pressed upwards and the door lock is
unlatched.
Locking:
 Close the door.
 Push the safety knob down (Fig. 42,2).
6.1.3 Conversion door, outside (Hartal M1)
Opening:  Insert the key into locking cylinder (Fig. 43,1) and turn until the door lock is
unlatched.
 Return the key to the central position and remove it.
 Pull on the handle (Fig. 43,2). The door is open.
Locking:
 Insert the key into locking cylinder (Fig. 43,1) and turn until the door lock is
engaged.
 Return the key to the central position and remove it.
Fig. 42 Door lock of driver's door,
inside
Fig. 43 Door lock of conversion door,
outside