227I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
12.8.5 Types of bulbs for exterior lighting
12.9 Replacing bulbs, internal
Exterior lighting Type of bulb
Front
Main beam H7 12 V 55 W
Low beam H7 12 V 55 W
Parking light W5W 12 V 5 W (Viseo)
Direction indicator Bay 9s 12 V 21 W
BAU 15s 12 V 21 W (Viseo)
Fog light H3 12 V 55 W
Rear
Rear light Ba15s 12 V 5 W
Brake light Ba15s 12 V 21 W
Direction indicator Ba15s 12 V 21 W
Fog tail light Ba15s 12 V 21 W
Reverse light Ba15s 12 V 21 W
Third brake light LED
X Bulbs and light fittings can be extremely hot. Therefore, allow lights to
cool down before changing bulbs.
X Shut off the power supply on the safety cut-out in the 230 V fuse box
before changing bulbs.
X Store bulbs in a safe place inaccessible to children.
X Do not use any bulb that has been dropped or which shows scratches in
its glass. The bulb might burst.
X Lights can get very hot. When the light is switched on, there must always
be a safety distance of 30 cm between light and flammable objects. Fire
hazard!
X Do not replace the LEDs in lamps with standard light bulbs. Risk of fire
due to intense heat build up.
Z A new bulb should not be touched with the fingers. Use a cloth when
installing the new bulb.
Z Only use bulbs of the same type and with the correct wattage.
Z If LEDs in lights are defect, contact an authorised dealer or service centre.
To Next Page
Loading...
