Burstner I 2012 - Side Lights

226 I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
 Put in a new bulb.
 Reassemble the lamp in the reverse order.
Round lamps
 Undo the housing screws (Fig. 263,1).
 Remove housing.
 Remove bulb.
 Put in a new bulb.
 Reassemble the lamp in the reverse order.
12.8.4 Side lights
Side marker light The side marker light (Fig. 264,1) is fixed in the rear area at the top.
Direction indicator The lamp is glued in. If the bulb is faulty, contact an authorised dealer or
service centre.
Marker lights The marker lights (Fig. 264,2) are fitted in the lower part of the vehicle.
Fig. 263 Rear lights
1 Housing screws
2 Rear light/brake light
3 Direction indicator
4 Reverse light (right) and fog tail light
(left)
Fig. 264 Side lights
1 Side marker light
2 Marker light
3 Direction indicator
Z Please have the LEDs of the side marker light replaced at a service centre.
Z The lights have LEDs. To change the LEDs, contact an authorised dealer
or a service centre.