EasyManua.ls Logo

Burstner I 2012 - Power Supply

Burstner I 2012
292 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
265I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Technical data
16
16.3 Power supply
I 890 G 2300 9000 4600 2850
I 895 G 2300 9000 4600 2850
I 900 G 2300 9000 4600 2850
Mains connection Protection class I 230 V (± 10 %),
47 - 63 Hz
Mains power rating 400 VA
Appropriate batteries 6-cell lead acid and lead
acid gel batteries from
55 Ah
Charging characteristics IUoU
Final charge voltage 14.3 V
Charging current 18 A throughout entire sup-
ply voltage range, electroni-
cally restricted
18 A
Trickle charge voltage Automatic switching 13.8 V
Repeated charging cycle
(switchover to "Main charg-
ing")
At < approx. 13.8 V battery
voltage (with approx.
5 seconds delay)
Reflux (without mains and
with connected battery)
After approx. 3 minutes
"Mains Off"
< 0.3 mA
Guard circuits Short-circuit protection pro-
vided by built-in car fuse
(FKS)
Safety fuse, 3.15 AT at
power input
Overtemperature protection
Charging current distribu-
tion at mains connection
Starter battery float charge
with max. 2 A or 6 A
Max. 2 A (EBL 99) or
max. 6 A (EBL 220)
Living area battery charge
with max. 18 A
Max. 18 A
Charging current distribu-
tion during the journey
Simultaneous charging of
starter and living area bat-
teries by means of the alter-
nator
50 A
Parallel battery switching
via disconnector relay
Maximum permitted alter-
nator charging current to
the living area battery: 50 A
(see block diagram)
Battery monitor Disconnection 10.5 V ± 0.1 V
Battery monitor Minimum voltage for con-
nection
11.0 V ± 0.1 V
Type Body width,
exterior
Total length
without ladder
Wheelbase Overall height
without anten-
na

Table of Contents

Related product manuals