42 I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
During the journey
4
Push both armrests upward.
Slide seat forward.
Operate the release lever (Fig. 18,3). The latch is released.
Rotate the seat.
Moving seat in
lengthways direction
Adjust the driver's seat so that the driver can depress the pedals comfortably.
Pull the bar (Fig. 18,1) upwards.
Push the seat forwards or backwards.
Release the bar. The seat must audibly lock into place.
Setting the seat
inclination
Adjust the seat inclination so that the thighs rest on the seat surface without
any pressure.
Pull the lever (Fig. 18,2) upwards.
Bring the seat into the desired inclination position by applying or relieving
pressure.
Release the lever. The seat must audibly lock into place.
Adjusting the backrest Adjust the angle of the backrest so that the steering wheel can be held with the
arms slightly bent.
Turn the knurled knob (Fig. 18,4). The backrest inclines forwards or back-
wards, depending on the rotation direction.
Adjusting the armrest The height of the armrests can be steplessly adjusted.
Turn the knurled wheel (Fig. 19,1). The armrest inclines upwards or down-
wards, depending on the rotation direction.
4.9 Headrests
Before commencing the journey, adjust the headrests (Fig. 20,1) or the head-
rest (Fig. 21,1) so that the back of the head is supported at approximately ear
height. Push the headrests upwards or downwards by hand.
Z The headrests are not adjustable for all models.
Fig. 20 Bench headrest Fig. 21 Bench headrest (alternative)
To Next Page
Loading...
