Burstner I 2012 - Recessed Halogen Light (Flat); Recessed Light with LED

229I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Maintenance
12
12.9.3 Recessed halogen light (flat)
Halogen bulb G4 12 V/10 W
The recessed halogen light (Fig. 268,2) is installed flush with the panel.
Changing bulbs:
 Use a suitable tool (e.g. a screwdriver) to lever out the internal cover ring
with glass disk (Fig. 268,1) from the housing.
 Remove halogen bulb.
 Put in a new halogen bulb.
 Reassemble the lamp in the reverse order.
12.9.4 Recessed light with LED
Changing bulbs:  Contact a dealer or service centre.
Fig. 268 Recessed halogen light (flat)
Fig. 269 Recessed light
Z LED lamps have a very long life. It is not normally necessary to replace a
lamp.