194 I-Modell - 11/12 - Ausgabe 09/11 - 2096165 - BUE-0056-05EN
Sanitary fittings
10
Open the sliding trap. To do this, press the left side of the sliding trap
button.
Flush the toilet. Press the flush button.
After flushing close the sliding trap. To do this, press the right side of the
sliding trap button.
Emptying the Thetford
cassette:
Open the flap for the Thetford cassette and pull the retaining clip
upwards to remove the Thetford cassette.
Pull out the Thetford cassette as far as it can go.
Tip the Thetford cassette slightly and then pull it out completely.
Fig. 223 Opening the sliding trap
Fig. 224 Closing the sliding trap
Z The Thetford cassette can only be taken out if the sliding trap is closed.
Fig. 225 Removing the Thetford cas-
sette
To Next Page