Cameron Scanner 3100 EFM - Page 21

Table 1.2—Hardware Options
Radio Certications Supports communications with up to 20 remote Scanner 2000 Series devices (each Scanner
node can transmit and receive data)
Radio certications (by country):
Argentina: CNC
Australia/New Zealand: ACMA, R-NZ (Z571 Limited), C-Tick
Bahrain: TRA
Ecuador
Egypt: NRTA
Europe: CE Mark, R&TTE
India
Indonesia: SDPPI
Mexico: IFETEL
North America: FCC/IC
Oman, TRA
Qatar
Thailand
United Arab Emirates, TRA
Venezuela
Antenna
Direct-Mount Remote-Mount
Electrical Properties
Frequency Range 2.35 to 2.50 GHz 2.4 to 2.5 GHz
Impedance 50 ohms nominal at 2.4 GHz 50 ohms nominal at 2.4 GHz
Voltage Standing Wave
Range (VSWR)
1.13:1 <1.5
Connector N male brass nickel-plated
connector for use with N
female explosion-proof/
intrinsically-safe coupler
N female brass nickel-plated
connector, cable required
for connection to N female
explosion-proof coupler
Height 95.25 mm (3.75 in.) 800 mm (32.28 in.)
Shape Elbow (right angle) Straight
Material UV-resistant ABS Fiberglass
Operating Temperature –40 degC to 80 degC (–40
degF to 176 degF)
–40 degC to 80 degC (–40
degF to 176 degF)
Pole Mount Hardware
— N/A Standard hardware (included
with antenna) ts pole with
outside diameter up to 2 in.
— N/A Alternate remote-mount kit
available for pipe with outside
diameter of 2 3/8 in.
Antenna Cable Length N/A 10-, 20-, and 30-ft with
connectors
Type N/A Type 400
Temperature Range N/A –40 degC to 70 degC (–40
degF to 158 degF)
21
Scanner 3100 EFM Section 1