Canon imagePRESS Server A2200 - Page 37

USING THE IMAGEPRESS SERVER 37
Print Pages—Enables you to print system pages from the imagePRESS Server (see page 40).
You can print the following pages from the submenu that appears:
•
Test Page—Enables you to confirm that the imagePRESS Server-to-copier connection is
functioning properly. The Test Page provides sample images that you can use to
troubleshoot the imagePRESS Server. The following information is also listed: Server
name, printer model, output profile, calibration information, RGB source, rendering style,
date and time printed, CMYK simulation, simulation method, and compression
information.
When you print a Test Page to confirm that the imagePRESS Server-to-copier connection
is functioning properly, keep in mind that:
All color patches should be visible, even though they may be very faint in the 5% and 2%
range.
Each color’s patch set should show uniform gradation from patch to patch as the color
lightens from 100% to 0%.
Poor image quality may indicate a need to calibrate the system or service the copier.
Information on the Test Page includes the date and time of the last calibration, so the Test
Page should be kept for future reference. For more information, see Color Printing on the
User Documentation CD.
•
Configuration—Prints the current server and device configuration. This includes
information about all current Setup settings, calibration profiles, and the Ethernet address
of the imagePRESS Server. The Configuration page also provides version information for
the BIOS chip and information about any installed options or special features included in
the imagePRESS Server.
Printing the Configuration page can also be helpful during installation, Setup, and service.
After installing the imagePRESS Server (including connecting to the network) and before
default settings are changed in Run Setup, you can obtain a record of the defaults by
printing the Configuration page. Before you perform any service procedure, print the
imagePRESS Server Configuration page, if possible, so that you can return the settings to
their former configuration, if necessary.
•
Job Log—Prints a log of the most recent jobs printed on the imagePRESS Server. By
default, the Job Log lists the last 55 jobs. For more information about the Job Log, see
Configuration and Setup on the User Documentation CD.
•
Color Charts—Prints the color reference charts. These pages include swatches of the RGB,
CMY, and PANTONE colors available from the imagePRESS Server.
•
Font List—A list of all fonts resident on the imagePRESS Server hard disk drive.
•
E-mail Log—Prints a log of the last 55 e-mail transmissions to or from the
imagePRESS Server. The E-mail printing feature must be enabled in Setup before the
E-mail Log can be printed. For more information, see Configuration and Setup on the User
Documentation CD.
•
FTP Log—Lists jobs scanned on the copier and sent to the FTP site designated in the Setup
options. The log is available only when Scan to FTP is enabled in Setup. For more
information, see Configuration and Setup on the User Documentation CD.