Canon imagePRESS Server A2200 - Page 38

USING THE IMAGEPRESS SERVER 38
USB Media Server—Allows users to print a file from a USB device to one of the published
print connections.
Scan Job—Allows users to initiate a scan job from the Control Panel. For more information,
see Utilities on the User Documentation CD.
Shut Down—When you select this option, you can choose from the following:
•
Restart Server (soft reset)—Resets the imagePRESS Server server software but does not
reboot the entire system. Network access to the imagePRESS Server is temporarily
interrupted and all currently processing jobs are aborted and may be lost.
•
Shut Down System—Shuts down all imagePRESS Server server software and powers off the
system. Always select this option to power off the system.
•
Reboot System (hard reset)—Shuts down all imagePRESS Server activity properly, and
then reboots the system.
Clear Server—Clears all jobs from the server queues. It also clears the Job Log, all jobs saved
on the imagePRESS Server hard disk drive, and the index of all archived jobs. The Clear
Server command enables you to clear all queued print jobs from the imagePRESS Server (jobs
in the imagePRESS Server Print, Hold, and Printed queues). Jobs can also be deleted,
individually or as a group, from the job management tools. Clear Server also clears the Job
Log, all jobs archived on the imagePRESS Server hard disk drive, the index of archived jobs,
all FreeForm masters, and the index of FreeForm masters. To preserve the Job Log, print or
export the Job Log before you choose Clear Server.
To clear the imagePRESS Server, access the Functions menu and choose Clear Server. You are
asked to confirm your selection. You are also prompted to enter the Administrator password.
Run Setup—Allows you to access the Setup options to configure the network and printing
environment. Typically it is the network administrator’s responsibility to configure Setup
according to the network and user environment. Setup may be required the first time the
imagePRESS Server is powered on and can be changed at any time. For a list of Setup options
and detailed descriptions of each option, see Configuration and Setup on the User
Documentation CD.
Run Diagnostics—Allows you to run diagnostics on the following:
•
Video Diagnostics—Runs diagnostics on the copier interface board.
•
Test E-mail—Tests the imagePRESS Server e-mail printing feature.
Tray Alignment—Use this feature to align input trays for printing. Aligning the trays helps to
center an image on the printed page or match the front and back images of a duplex printed
page. For more information, see Utilities on the User Documentation CD.
Calibration—Allows the customer to calibrate the imagePRESS Server using ColorCal. If an
Administrator password has been set, you must enter it to access Calibration. For more
information, see Color Printing on the User Documentation CD.