3
Press ▲ or ▼ to select Eject Paper, and then press the OK button.
4
Press ▲ or ▼ to select "Yes", and then press the OK button.
The roll is now rewound and ejected.
Caution
•
If you have selected ManageRemainRoll > On in the Control
Panel menu, a barcode is printed on the leading edge of the
roll.
Do not remove the roll before the barcode is printed. You will
be unable to keep track of the amount of roll paper left. (See
"Keeping Track of the Amount of Roll Paper Left.") →P.456
5
Positioning your hands as shown, open the Roll Cover.
6
Using both hands, rotate the Roll Holder toward the
back to rewind the roll.
Removing the Roll from the Printer
iPF765
User's Guide
Handling Paper Handling rolls
452
To Next Page
Loading...
