Borderless Printing at Actual Size (Mac OS X)
Borderless Printing at Actual Size (Mac OS X)
This topic describes how to print borderlessly at actual size based on the following example.
•
Document: Any Type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
•
Paper: Roll paper
•
Paper type: Heavyweight Coated Paper
•
Roll paper width: 10 inches (254.0 mm)
1
This sets the B Format for and C Paper Size.
Note
•
The configuration method varies depending on the OS and
application software you are using.
If Page Setup is displayed in the application menu, the set-
tings are configured by opening the Page Attributes dialog
box from Page Setup.
If it is not displayed, the settings are configured in the upper
part of the printer driver displayed when you select Print
from the application software menu.
2
Select the printer in the A Printer list.
3
In the F Paper Size list, choose a paper size supported for borderless printing. Here, click 10"x12" - Border-
less.
Note
• Paper sizes supported for borderless printing are indicated by —Borderless.
4
If you configured the settings using the Page Attributes dialog box, click F OK to close the dialog box, and
then select Print from the application software menu.
Borderless Printing at Actual Size (Mac OS X)
iPF765
User's Guide
Enhanced Printing Options Printing at full size
94
To Next Page
Loading...
