9
Select the C Enlarged/Reduced Printing check box.
Note
•
If the C Enlarged/Reduced Printing check box is not dis-
played on the Page Setup sheet, clear the B Borderless
Printing check box.
10
Click E Fit Roll Paper Width.
Note
• After you click E Fit Roll Paper Width, the Information dialog box is displayed. Select the width of the loaded roll in
the Roll Paper Width list and click OK.
• Make sure the roll paper width you specify matches the width of the loaded roll.
11
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings(Windows) →P.179 "
Resizing Originals to Fit the Roll Width (Mac OS X)
Resizing Originals to Fit the Roll Width (Mac OS X)
This topic describes how to enlarge originals before printing to match the roll width, based on the following example.
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: 16 inches (406.4 mm)
iPF765
Resizing Originals to Fit the Roll Width (Mac OS X)
User's Guide
Enhanced Printing Options Printing enlargements or reductions
77
To Next Page
Loading...
Need help?
General
Weight and Dimensions
