Ink now fills the system. It takes about seven minutes to com-
plete.
Important
• Never remove an Ink Tank while the system is filling with ink.
• After Printhead has been replaced and filled with ink, Head Posi. Adj. ( Auto(Advanced)) is performed if you have
selected Rep.P.head Print > On in the Control Panel menu. (See "Menu Settings.") →P.500
In this case, follow the instructions on the Display Screen for Printhead adjustment.
If Rep.P.head Print is Off, perform Head Posi. Adj. ( Auto(Advanced)) yourself. (See "Automatic Adjustment to
Straighten Lines and Colors (Head Posi. Adj.).") →P.604
iPF765
Replacing the Printhead
User's Guide
Maintenance and Consumables Printheads
635
To Next Page
Loading...
