Ink level detection
Ink tanks specified for this printer feature an ink level detection function to prevent the ink from running out during print-
ing, which prevents printer damage. (See "Ink Tanks.") →P.620
This function will not work correctly if you use refill ink tanks. As a result, printing stops. Thus, before using refill ink
tanks, you must cancel the ink level detection.
Printing with the ink level detection canceled may lead to printer damage and printing problems. Canon Inc. is not liable
for any damage that may occur as a result of refilling ink.
Important
• After ink level detection has been released, this function cannot be reactivated for currently loaded Ink Tank. To use ink level
detection again, replace the Ink Tank with new ones specified for use with the printer.
• Repeatedly removing and inserting an Ink Tank may damage the connection between the Ink Tank and the printer, which
may cause ink leakage from the Ink Tank and damage the printer.
Releasing ink level detection
1
On the Display Screen, a message indicates that the ink level cannot be
detected. After checking the message, press the ▶ button.
2
Press ▲ or ▼ to select Information, and then press the OK button.
3
A confirmation message is shown on the Display Screen about releasing
ink level detection. After checking the message, press the ▶ button.
4
After checking the message, press the ▶ button.
Ink Level Detection
iPF765
User's Guide
Troubleshooting Other problems
680
To Next Page
Loading...
