Other Maintenance
12. Push down the release lever (a) as shown as you gently return all ink tank lock levers to the
original position.
13. Close the Ink T ank Cover .
At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is nished, Finished preparing to move printer . T urn off printer . is
displayed.
14. Press the Power button and turn of f the printer .
Important
• T urn of f the printer before you unplug it. It may damage the printer if you unplug it before it is of f and
transfer it in that state. If you accidentally unplug the printer , plug it in again, reinstall the Ink T ank ,
wait until the printer comes online, and follow this procedure again.
15. Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord.
604 Maintenance
To Next Page
Loading...
Need help?
General