62-11785 3–26
3.18 STOPPING UNIT
To stop the unit, place the START/RUN-OFF switch in the OFF position. The unit will shutdown immediately while
the system completes a shutdown sequence and then the display will go blank. The display will turn off.
The system will close the compressor suction modulation valve (CSMV) and evaporator expansion
valve (EVXV) to 0% open before turning off.
Due to internal processing, turning the START/RUN - OFF switch OFF then back to the START/RUN
position will result in a 4 to 50 second delay between the display going off and coming back on again.
START/STOP ELECTRIC COOL
BOX TEMPERATURE
o
FSETPOINT
o
F
STATUS OK
34.3
34
SROS