Cellwatch Frontier - Frontier Hardware Specifications

Cellwatch Frontier System Installation & User Manual
Section I – Installation Guide-15
Frontier Hardware Specifications
Power Supply
AC Input 100-240 VAC @ 50-60Hz, 10W
(Alternative) DC Input
Option 1: 20-70 VDC, 10W
Option 2: 70-150 VDC, 20W
Option 3: 100-240 VDC, 20W
Permitted Mains Supply Variations 10%
Transient Overvoltage Category 2
Fuse Rating 250V 1A Slow-Blow
Environmental (Indoor use only)
Operating Temperature 0-65°C
Relative Humidity 5-90% non-condensing
Maximum Altitude 3,000 m (~10,000 ft.)
Pollution Degree 2
Dimensions
Wall Mount Model 9.75 in. x 5 in. x 2.5 in.
Rack Mount Model (1U) 1.75 in. x 19 in. x 6 in.
Weight
Wall Mount Model 1.6 lbs. / 0.73 kg
Rack Mount Model 2.2 lbs. / 1.00 kg
Fiber Optics
Optical Cable Acrylic
Outside Diameter 2.2 mm
Wavelength 400-700 nm
Range 150 mm – 50 m (6 in. – 150 ft.)
Digital Inputs
Isolated Digital Inputs 4
Relay Outputs
Quantity 4
Type Dry Contact (NO/NC) 30VDC 5A
Relays
Battery Alarm (programmable)
System Alive
String 1 Disconnect (Thermal Runaway only)
String 2 Disconnect (Thermal Runaway only)
Capacity
Max. Number of Measurement Points 256
Max. Number of DCMs 64
Temperature Probe
Quantity 4