Cellwatch Frontier - Events; Default Variations

Cellwatch Frontier System Installation & User Manual
Section IV – Integration Guide-122
Link Status Description
“Keep-alive” interval
(seconds)
The amount of time (in seconds) to keep connection sessions open.
Frontier will keep a session open for the specified amount of time
after losing connection with a master station.
Select/Execute Timer Description
Select-to-execute interval
(seconds)
The amount of time (in seconds) that a master station has to perform
an Execute operation following a Select operation on an object index
before the operation expires.
To apply any changes to settings on this page, click the Save settings button.
Events
The description for each option on the Events tab can be found in the table below.
Unsolicited Events Mask Description
Do not present or send the
following classes of events
Select which classes (Class 1, Class 2, Class 3) to not send when a class
poll is requested by the master station.
Event Class Queues (Class 1,
Class 2, Class 3)
Description
Queuing Delay (seconds)
The number of seconds to hold an Event in the Unsolicited Event
queue before transmitting.
High Water (event
occurrences)
The maximum number of Events to collect in queue before
transmitting.
To apply any changes to settings on this page, click the Save settings button.
Default Variations
The Default Variations tab contains fields allowing the user to configure the default variation used when
responding to class polls or reporting events to the master station.