EasyManuals Logo

CESAB S210 User Manual

CESAB S210
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
© Cesab 8 – 41 T Code(s): 841, 842, 843
Repair manual: Troubleshooting Model(s): S210, S212, S212S, S212L, S214, S214L, S220D
Publication Number: 7588857-040 Date: 2018-05-01 Applies from serial number: 6384351-
8:123
Argument error in
option. Invalid
configuration in one
or more options.
Creep speed,
blocked lifting/
lowering
movement
1: Argument
error option
1: Check parameters
Check that factory parameters
are set according to the truck
configuration.
Check that other parameters
are set correctly.
8:130
CAN
communication
error with li-ion
battery
Creep speed,
blocked lifting
movement If
CAN key
connected -
creep speed
1: Error on CAN
bus wiring or
connections
1: Check the CAN bus
Check that CAN bus is intact in
terms of wiring harness,
resistance and connectors.
Disconnect the battery. Check
that the resistance between
(X41:3) and (X41:4) is 54 - 66
ohms.
Check that the CAN wiring
harness is not pinched.
Measure resistance between
the chassis and CAN connector.
Limit value >24 kOhm
8:131
Temperature in the
li-ion battery is too
high
Creep speed,
blocked lifting
movement
1: 1: Let the battery cool down
8:132
Current in the li-ion
battery is too high
Creep speed,
blocked lifting
movement
1: Regenerative
braking with
fully-charged
battery.
2:
1: No action.
2: Check battery voltage
Check the voltage using the
built-in test procedure and
comparing with value from
external volt meter
Check connectors, joints and
splices for damage or corrosion.
Check fuses F1 and F50
8:133
Li-ion battery
temperature below
permitted level
Creep speed,
blocked lifting
movement
1: 1: Move the truck to a warmer
area
8:134
Defective hardware
in the li-ion battery
Creep speed,
blocked lifting
movement
1: Defective
sensor in the
module.
1: Contact the battery
manufacturer.
8:135
Internal CAN
problem in the li-ion
battery
Creep speed,
blocked lifting
movement
1: Communication
problem
between
modules in the
battery.
1: Contact the battery
manufacturer.
Code Description
Truck
behaviour
Error cause(s) Procedure
https://www.forkliftpdfmanuals.com/

Table of Contents

Other manuals for CESAB S210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CESAB S210 and is the answer not in the manual?

CESAB S210 Specifications

General IconGeneral
BrandCESAB
ModelS210
CategoryTrucks
LanguageEnglish

Related product manuals