CG Emotron VFX Series User Manual

42 Installation CG Drives & Automation, 01-5326-01r5
** Valid when brake chopper electronics are built in.
***** XX=20 or 54, module IP-class.
69-250
H69 (2x) 25 - 240
31 (for
25-34 mm
2
)
42 (for
35-152 mm
2
)
56 (for
153-240
mm
2
)
(2x) 25 - 240
31 (for
25-34 mm
2
)
42 (for
35-152 mm
2
)
56 (for
153-240 mm
2
)
PE/Earth via mounting
screws/mounting frame.
In order to secure proper
earthing, always use all
mounting screws and
tighten them thoroughly.
Copper
(Cu)/
Aluminu
m (Al)
75°C
69-300
69-375
69-400
69-430
I69 (3x) 25 - 240 (3x) 25 - 24069-500
69-595
69-650
J69 (4x) 25 - 240 (4x) 25 - 24069-720
69-800
69-905
KA69 (5x) 25 - 240 (5x) 25 - 240
69-995
69-1k2 K69 (6x) 25 - 240 (6x) 25 - 240
69-1k4 L69 (7x) 25 - 240 (7x) 25 - 240
69-1k6 M69 (8x) 25 - 240 (8x) 25 - 240
69-1k8 N69 (9x) 25 - 240 (9x) 25 - 240
69-2k0 O69 (10x) 25 - 240 (10x) 25 - 240
69-2k2 P69 (11x) 25 - 240 (11x) 25 - 240
69-2k4 Q69 (12x) 25 - 240 (12x) 25 - 240
69-2k6 R69 (13x) 25 - 240 (13x) 25 - 240
69-2k8 S69 (14x) 25 - 240 (14x) 25 - 240
69-3k0 T69 (15x) 25 - 240 (15x) 25 - 240
Table 19 Cable connector range and tightening torque for Emotron VFX69, according to IEC ratings

CG Emotron VFX Series Specifications

General

Brand	CG
Model	Emotron VFX Series
Category	Controller
Language	English