CG Emotron VFX Series User Manual

212 CG Drives & Automation, 01-5326-01r5
Example:
Fig. 148 shows the third trip memory menu [830]: Over
temperature trip occurred after 1396 hours and 13 minutes
in Run time.
Fig. 148 Trip 3
11.10.3 Trip Messages [82P] - [89P]
Same information as for menu [810].
Communication information
All nine alarm lists contain the same type of data. For
example DeviceNet parameter 31101 in alarm list 1
contains the same data information as 31151 in alarm list 2.
11.10.4 Reset Trip Log [8A0]
Resets the content of the 9 trip memories.
Communication information
Modbus Instance no/
DeviceNet no:
31151–31185
31201–31235
31251–31285
31301–31335
31351–31385
31401–31435
31451–31485
31501–31535
Trip log list
2
3
4
5
6
7
8
9
Profibus slot/index
122/40–122/74
122/90–122/124
122/140–122/174
122/190–122/224
122/240–123/18
123/35 - 123/68
123/85–123/118
123/135–123/168
Trip log list
2
3
4
5
6
7
8
9
EtherCAT and CANopen
index (hex)
247e - 24b0
24b1 - 24e2
24e3 - 2514
2515 - 2546
2547 - 2578
2579 - 25aa
25ab - 25dc
25dd - 260e
Trip log list
2
3
4
5
6
7
8
9
Profinet IO index
1151 - 1185
1201 - 1235
1251 - 1285
1301 - 1335
1351 - 1385
1401 - 1435
1451 - 1485
1501 - 1535
Trip log list
2
3
4
5
6
7
8
9
Fieldbus format
See Trip 811 - 81O
Modbus format
830 Over temp
Stp 1396h:13m
8A0 Reset Trip
Default: No
No 0
Yes 1
Modbus Instance no/DeviceNet no: 8
Profibus slot/index 0/7
EtherCAT and CANopen index (hex) 2008
Profinet IO index 8
Fieldbus format UInt
Modbus format UInt
NOTE: After the reset the setting goes automatically
back to “NO”. The message “OK” is displayed for 2
sec.

CG Emotron VFX Series Specifications

General

Brand	CG
Model	Emotron VFX Series
Category	Controller
Language	English