CG Emotron VFX Series User Manual

CG Drives & Automation,01-5326-01r5 Functional Description 91
Communication information
11.4 Main Setup [200]
The Main Setup menu contains the most important settings
to get the AC drive operational and set up for the
application. It includes different sub menus concerning the
control of the unit, motor data and protection, utilities and
automatic resetting of faults. This menu will instantaneously
be adapted to build in options and show the required
settings.
11.4.1 Operation [210]
Selections concerning the used motor, AC drive mode,
control signals and serial communication are described in
this submenu and is used to set the AC drive up for the
application.
Language [211]
Select the language used on the LC Display. Once the
language is set, this selection will not be affected by the Load
Default command.
There are two software sets with different languages available
for delivery. “Standard software, Language set 1” and the
optional “Standard software, Language set 2”, see table
below and Fig. 1, page 9.
Communication information
Modbus Instance no/DeviceNet no: 43007
Profibus slot/index 168/166
EtherCAT and CANopen index (hex) 4bbf
Profinet IO index 19391
Fieldbus format
Modbus format
211 Language Language set
Default: English
Set 1 Set 2
English 0 English selected X X
Svenska 1 Swedish selected X -
Nederlands 2 Dutch selected X -
Deutsch 3 German selected X X
Français 4 French selected - X
Español 5 Spanish selected X -
Руccкий 6 Russian selected X X
Italiano 7 Italian selected X -
Cesky 8 Czech selected - X
Turkish 9 Turkish selected - X
-10 - -
Polski 11 Polish selected X
Modbus Instance no/DeviceNet no: 43011
Profibus slot/index 168/170
EtherCAT and CANopen index (hex) 4bc3
Profinet IO index 19395
Fieldbus format UInt
Modbus format UInt

CG Emotron VFX Series Specifications

General

Brand	CG
Model	Emotron VFX Series
Category	Controller
Language	English