Cisco 3845 - Security Bundle Router - Page 140

6-12
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 6 Configuring Synchronous Ethernet
Monitoring SyncE
T4 DPLL Clock Info:
Priority Source Type
---------------------------------------------------------------
02 Te0/1 SYNCE
---------------------------------------------------------------
System Clock Mode : Non Revertive
EEC Option Configured : Option 2
System Clock State is Automatic
---------------------------------------------------------------
hold-timeout : infinite
ESMC/SSM workaround using REP not configured
---------------------------------------------------------------
Measured offset freq for input BITS is +0.0ppm (3.8 ppm resolution)
Measured offset freq for input Te0/1 is +0.0ppm (3.8 ppm resolution)
Measured offset freq for input Te0/2 is +0.0ppm (3.8 ppm resolution)
Measured offset freq for current path (T4 DPLL) is +0.0ppm