CHAPTER
1-1
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
1
Overview
This chapter provides these topics about the Cisco Metro Ethernet (ME) 3800X and 3600X switch
software:
• Software Licenses and Features, page 1-1
• Features, page 1-2
• Where to Go Next, page 1-11
In this document, IP refers to IP Version 4 (IPv4).
Software Licenses and Features
If you have a service support contract and order a software license or if you order a switch, you receive
the universal software image, available in crypto an noncrypto versions. If you do not have a service
support contract, such as a SMARTnet contract, download the image from Cisco.com.
The ME 3600X supports these licenses:
• Metro IP access is the universal image.
• Advanced Metro IP access license.
• 10 Gigabit Ethernet upgrade license—enables 10 Gigabit Ethernet on the SFP+ uplink ports.
For differences in feature support for each license, see Table 1-1 and Table 1-2 on page 1-10.
The ME 3800X supports these licenses plus a scaled license that can be installed with any of these
licenses to increase the supported values for that license, for example, more MAC addresses, VLANs,
IPv4 routes, and so on.
• Metro Ethernet services is the universal image.
• Metro IP service license.
• Metro Aggregation services license.
For differences in feature support for each license, see Table 1-2 and Table 1-4 on page 1-10.
To install a software image, see the switch release notes and the “Working with the Cisco IOS File
System, Configuration Files, and Software Images” chapter in the software configuration guide.
To install a software license, see the “Cisco IOS Software Activation Tasks and Commands” chapter in
the Cisco IOS Software Activation Configuration Guide:
http://www.cisco.com/en/US/docs/ios/csa/configuration/guide/12.4T/csa_book.html
To Next Page
Loading...
Need help?
General