Cisco 3845 - Security Bundle Router - Global Configuration Mode; IP Unicast Routing Commands; Privileged EXEC or User EXEC Mode

C-4
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Appendix C Unsupported Commands in Cisco IOS Release 12.2(52)EY
IP Unicast Routing Commands
ip multicast helper-map {group-address | broadcast} {broadcast-address | multicast-address}
extended-access-list-number
ip multicast rate-limit {in | out} [video | whiteboard] [group-list access-list] [source-list access-list]
kbps
ip multicast ttl-threshold ttl-value (instead, use the ip multicast boundary access-list-number
interface configuration command)
ip pim nbma-mode
IP Unicast Routing Commands
Privileged EXEC or User EXEC Mode
clear ip accounting [checkpoint]
clear ip bgp address flap-statistics
show cef [drop | not-cef-switched]
show ip accounting [checkpoint] [output-packets | access-violations]
show ip bgp dampened-paths
show ip bgp inconsistent-as
show ip bgp regexp regular expression
show ipv6 (all)
Global Configuration Mode
ip accounting-list ip-address wildcard
ip accounting-transits count
ip cef traffic-statistics [load-interval seconds] [update-rate seconds]]
ip flow-aggregation
ip flow-cache
ip flow-export
ip gratuitous-arps
ip local
ip reflexive-list
router iso-igrp
router mobile
router odr