33-46
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 33 Configuring IP Multicast Routing
Monitoring and Maintaining IP Multicast Routing
Monitoring IP Multicast Routing
You can use the privileged EXEC commands in Table 33-8 to monitor IP multicast routers, packets, and
paths:
Table 33-8 Commands for Monitoring IP Multicast Routing
Command Purpose
mrinfo [hostname | address] [source-address |
interface]
Query a multicast router or multilayer switch about which neighboring
multicast devices are peering with it.
mstat source [destination] [group] Display IP multicast packet rate and loss information.
mtrace source [destination] [group] Trace the path from a source to a destination branch for a multicast
distribution tree for a given group.
To Next Page
Loading...
