Cisco 3845 - Security Bundle Router Software Guide

27-57
Cisco ME 3800X and 3600X Switch Software Configuration Guide
OL-23400-01
Chapter 27 Configuring QoS
Displaying QoS Information
To remove the policy map and port association, use the no service-policy {input | output}
policy-map-name service-instance configuration command.
Displaying QoS Information
To display QoS information, use one or more of the privileged EXEC commands in Table 27-2. For
explanations about available keywords, see the command reference for this release.
Step 3
service instance number ethernet [name] Configure an EFP (service instance) and enter service-instance
configuration mode. See Chapter 11, “Configuring Ethernet
Virtual Connections (EVCs).”
Note You must enter the switchport mode trunk and
switchport trunk allowed vlan none interface
configuration commands on an interface before
configuring an EFP. You must also enter the no ip
igmp-snooping vlan vlan-id command for the VLAN of
the bridge domain.
Step 4
encapsulation {default | dot1q |
priority-tagged | untagged}
Configure encapsulation type for the service instance.
Note You must configure encapsulation type and a bridge
domain for the service instance, or the service-policy
command will be rejected.
Step 5
bridge-domain bridge-id [split-horizon group
group-id]
Configure the bridge domain ID. The range is from 1 to 8000.
Step 6
service-policy {input | output}
policy-map-name
Specify the policy-map name and whether it is an input policy
map or an output policy map.
Step 7
end Return to privileged EXEC mode.
Step 8
show ethernet service instance policy-map Verify your entries.
Step 9
copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Table 27-2 Commands for Displaying Standard QoS Information
Command Purpose
show class-map [class-map-name] Display QoS class-map information for all class maps or the
specified class map.
show policy-map [policy-map-name | interface
[interface-id] [input | output] [class class-name]]
Display QoS policy map information for the specified policy
map name, interface, input or output policy maps, or policy-map
class.
show ethernet service-instance policy map Display QoS policy map information for policy maps attached to
EFP service instances.
show running-config Display the configured class maps, policy maps, table maps, and
aggregate policers.

Cisco 3845 - Security Bundle Router Specifications

General

Brand	Cisco
Model	3845 - Security Bundle Router
Category	Switch
Language	English